ER-VW ionizer

• Nozzle angle adjustment
  The angles of the two nozzles can be adjusted within a range of approximately 190° by screwing down the ends of the nozzles.
• Compact and ultrathin design
  The thickness of the unit is 18.9mm. Since the nozzle angles can be adjusted, the unit can be installed even if there is little space due to the presence of other equipment.
• Minimum air consumption
  The ER-VW series can utilize air flow levels starting from a minimum of 15 l/min. Because the amount of air consumed is so low, the load placed on air supply equipment can be reduced.
• Air supply monitoring function
  This function causes discharging to stop automatically if the supply of air drops below a certain pressure. When this happens, the AIR indicator lights up and the discharge output (DSC) turns off. This ensures a constant discharging.
• Easy connection possible
  The joint kit (optional) can be used to connect up to a maximum of 5 ER-VW units. The air supply part is connected via quick connection joints, and the power supply and inputs / outputs can also be connected easily using connection cables with connectors at both ends.
  Multiple ER-VW units can be connected to provide charge removal layouts that suit the target equipment.

Notes

1. A typical sample applied with a supply voltage of 24 V, a distance of 100mm from the front surface of the air flow outlet and a pressure of 0.25MPa. (measured on a sample left in the atmosphere at a relative humidity of max. 65% RH for at least 24 hours).
2. A typical sample applied with a supply voltage of 24 V, a distance of 300mm from the front surface of the air flow outlet and a pressure of 0.25MPa.
3. The dried clean air is defined for air passing through air dryer (dew point: equivalent of -20°C) and air filter (mesh-size: equivalent of 0.01μm).