MINAS E7 for Packaging
F.R.E.E. your packaging machine with MINAS E7
Packaging machines are expected to do more than ever, while becoming easier to engineer, commission, and operate.
MINAS E7 brings together intelligent commissioning, precise motion control, and reliable performance in a cost-effective servo solution, giving machine builders and users more freedom.
F.R.E.E. - Flexible Reliable Effective Engineered
F for Flexible
Commissioning in minutes
One Minute Tuning and Tuningless operation help reduce dependency on servo specialists during machine start-up.
Overcome limited availability of skilled specialists for Machine Builders and Machine Users
With fewer servo drive experts available on the shop floor, machine builders need automation that is easier to deploy and maintain. MINAS E7 addresses this challenge with intelligent features such as One-Minute-Tuning and Tuningless Mode, enabling fast and reliable machine setup with minimal specialist knowledge. This reduces engineering effort, accelerates commissioning, and helps machine builders cope with labor and skills shortages.
The benefits continue long after machine delivery. For packaging machine operators, easier setup and optimized motion control mean less reliance on highly skilled maintenance personnel, faster troubleshooting, and reduced downtime. As a result, end users can operate and maintain their machines more efficiently, ensuring consistent productivity even when experienced automation specialists are difficult to find.
Optimize Changeovers and Maintain Peak Performance Automatically
Frequent format changes, varying product weights, and different machine recipes can significantly increase setup effort and cause performance fluctuations. MINAS E7 addresses these challenges with One-Minute-Tuning and real-time autotuning. During machine setup, One-Minute-Tuning automatically identifies the optimal servo parameters within minutes, dramatically reducing engineering time and enabling faster machine deployment. Once the machine is in operation, real-time autotuning continuously compensates for changes in load inertia and mechanical characteristics, helping to maintain stable performance without manual intervention.
For packaging machine builders, this means greater flexibility when designing machines for multiple formats and future product variations. For machine users, it results in faster changeovers, less downtime after recipe changes, and consistently high machine performance across different products and production runs. The result is a more adaptable packaging machine that can respond quickly to changing market demands while maximizing productivity and Overall Equipment Effectiveness (OEE).
R for Reliable
Connected by design
EtherCAT connectivity and GM controllers enable scalable multi-axis motion architectures.
Reduce scrap rate
20bit-feedback, fast communication and high-precision position tracking support reliable processes in packaging machines like sealing, cutting or dosing.
Stabilizing mechanical constructions
Notch and adaptive filters, damping control, friction compensation and load fluctuation suppression help stabilize lightweight mechanics and reducing the impact of vibration and resonance around belts, jaws, knives and arms.
E for Effective
- Precision without complexity
20-bit feedback, fast response and cycle timing support repeatable sealing, filling, cutting, coding and transfer. - Cost-smart performance
Compact, compatible and positioned for machines where value and reliability must coexist. - Safety integrated
STO simplifies safety-related machine design and reduces external hardware requirements. - Accelerate machine development with Intelligent Auto-Tuning/1-minute-tuning
In a highly competitive market, every week saved during machine development can make a difference. MINAS E7 helps machine builders bring machines to market faster with powerful Auto-Tuning, One-Minute-Tuning, and Tuningless Mode functions. Instead of spending valuable engineering hours manually optimizing servo parameters, engineers can achieve stable and high-performance motion in a fraction of the time. This simplifies machine development, reduces commissioning effort, and enables faster project completion—even when experienced motion control specialists are in short supply.
The advantages extend to installation at the end customer's site. Thanks to automated tuning and easy adjustment of machine parameters, commissioning can be completed more quickly and with fewer on-site interventions. This shortens machine startup times, reduces travel and service costs, and allows production to begin sooner. For packaging machine users, this means a faster return on investment and a smoother transition from machine delivery to full-scale production.
Effectiveness on Performance and Costs
Achieving high machine throughput without compromising precision, stability, or cost efficiency is a key challenge for modern packaging machines. MINAS E7 helps machine builders strike this balance with advanced servo control that delivers fast cycle times, accurate positioning, and reliable motion performance, even in highly dynamic applications. Intelligent features such as automatic tuning ensure optimal machine behavior from commissioning through daily operation, helping to maintain consistent performance while reducing the time and effort required for setup and optimization.
The result is higher productivity, improved product quality, and less unplanned downtime. At the same time, MINAS E7 contributes to lower machine lifecycle costs by reducing engineering effort, shortening commissioning times, minimizing maintenance requirements, and helping operators achieve stable production with fewer adjustments. This combination of high performance and cost efficiency enables machine builders to create competitively priced machines that deliver maximum value to their customers.
E for Engineered
Proven Servo Expertise Built into Every Drive
Choosing MINAS E7 means benefiting from Panasonic's decades of experience in motion control and servo technology. This extensive know-how is embedded in every aspect of the drive from its advanced control algorithms and intelligent tuning functions to its high reliability and ease of use. Machine builders can leverage proven servo technology that has been refined across thousands of applications worldwide, reducing development risks and accelerating machine design.
For end users, this translates into stable machine performance, consistent product quality, and long-term operational reliability. Panasonic's continuous innovation in servo control helps ensure that MINAS E7 delivers the precision, responsiveness, and efficiency required by modern packaging machines, while providing the confidence that comes with a trusted and experienced automation partner. As a result, both OEMs and machine operators benefit from a future-proof motion platform that combines proven expertise with the latest performance-enhancing technologies.
Complete solution for your machine
MINAS E7 is part of Panasonic’s comprehensive automation portfolio, including servo motors, PLCs, HMIs, sensors, networking products, and the powerful GM Motion Controller. By combining these technologies on a common platform, machine builders can reduce engineering effort, simplify integration, and accelerate machine development with components that are designed to work seamlessly together.
The GM Motion Controller enables precise synchronization and coordinated control of multiple axes, making it ideal for demanding packaging applications such as flow wrapping, cartoning, labeling, and pick-and-place systems. In combination with MINAS E7, it delivers highly dynamic and accurate motion control while reducing programming complexity and commissioning time.
For machine users, the benefits are higher system reliability, simplified maintenance, and the convenience of working with a single automation partner. The result is a scalable and future-ready machine concept that combines maximum performance with lower lifecycle costs.
Why choose MINAS E7
-
Faster setup: One-Minute-Tuning, automatic tuning and Tuningless Mode simplify commissioning and reduce reliance on servo specialists.
-
Easier format changes: Real-time autotuning adapts to changing loads and mechanics, helping maintain stable performance across products and recipes.
-
Precise packaging motion: 20-bit feedback, fast response and accurate position tracking support repeatable processes and help reduce scrap.
-
Scalable multi-axis control: EtherCAT and Panasonic GM controllers enable synchronized motion for flow wrapping, cartoning, labeling and pick-and-place.
-
Stable machine mechanics: Notch and adaptive filters, damping control, friction compensation and load fluctuation suppression reduce motion disturbances.
-
Integrated safety: Safe Torque Off (STO) simplifies safety-related design and reduces external hardware requirements.
-
Cost-conscious performance: Compact design and automated tuning help reduce engineering, commissioning and maintenance effort.
-
One automation partner: Panasonic combines servo expertise with motors, controllers, HMIs, sensors and networking products to simplify integration and maintenance.