With the new pulse air-gun ionizer from Panasonic, operators can comfortably neutralize static electricity while manually cleaning. The pulse air-gun’s light-weight, ergonomic design combined with an oil- and heat-resistant 2m cable makes it ideal for flexible use at the production line.
A white LED on the front of the gun illuminates target objects.
You can switch between long pulse, short pulse and continuous air emission modes. Ionized air can be emitted at high pressure (range 0.05 to 0.50 MPa), neutralizing static charges and removing dust simultaneously and swiftly.
- Charge removal time of 0.5s
- Light-weight, ergonomic design for operator comfort
- High emission pressure (range 0.05 to 0.50 MPa), maximizing cleaning speed
- Oil and heat-resistant 2m cable
- Three ionized air emission modes: long pulse, short pulse, continuous
- White LED for illuminating target object
|Charge removal time||Max. 0.5s (±1000V -> ±100V )1|
|Applicable fluid||Air (dried clean air)2|
|Supplied air flow||Max. 300ℓ/min, active noise reduction|
|Air pressure range||0.05 to 0.50MPa|
|Power supply voltage||AC adapter:
Input: 100 to 240V AC ±10%, 50/60Hz
Output: 24V DC
|Power consumption||Max. 30VA|
|Discharge method||High-frequency AC method|
|Pulse air mode||Long pulse, short pulse , continuous; selectable by switch|
|LED illumination mode||ON (always ON) / SYNC (synchronized with trigger) / OFF (always OFF)|
|Ambient temperature||0 to +50°C (no dew condensation), AC adapter: 0 to +40°C|
|Ambient humidity||35 to 65% RH (No dew condensation)|
|Weight||Approx. 270g (main unit only)|
Where measurement conditions have not been specified precisely, the specifications apply to an ambient temperature of 20°C.
1 Typical value for pulse air mode: CONT at 100 mm from the front of discharge nozzle at an applied air pressure of 0.50MPa.
2 Dried clean air is the air passing through an air dryer (dew point approx. -20°C) and air filter (mesh size approx. 0.01μm)
- Charge removing and cleaning on PCB
- Charge removing and cleaning on FPD
- Dust removal before painting