Human Machine Interface hero

GT05 touch terminal

The GT05 series is by default equipped with a USB interface and an SD card slot and supports multilanguage displays.

GT05 touch terminal shadow


The GT05 series provides a clear and beautiful QVGA LCD display and includes 12 different models. You can choose models with monochrome or color display, with an RS232C or RS422/RS485 interface, and with a pure black or hairline silver housing. The three-color backlight of the GT05M (red, white, pink) and the GT05G (red, green, orange) allows you to identify the machine status at a glance. A USB programming port and SD memory card slot are also available for all models.

USB interface and SD memory card slot as standard equipment

HMI GT05 USB interface and SD memory card slot as standard equipment

You can connect your PC and GT05 using a commercially available USB cable to transfer screen data.

The use of SD memory cards makes copying screen data between GT05 terminals easy. You can also store firmware on the SD memory card. SD memory cards with a maximum of 16GB are supported.

Ultra-thin body

HMI GT05 Ultra-thin body

The in-panel depth is a mere 33.8mm (including the attachment fittings). The ultra-thin body fits into a variety of installation locations without spoiling the design of the target equipment.

Multi-language function


Using the multi-language function, you can easily translate all texts in the application to other languages. The multi-language exchange string list for switching the language display can be edited in Excel and imported. A maximum of 16 languages can be created for an application.


HMI GT series through function

Communication can be set to take place automatically between the COM and TOOL ports using the “through-function”. When the FP series tool software installed on the computer connected to the GT series as shown below is booted, PLC programs can be edited via the GT panel. The through-function does not require any special settings and is always in standby mode.

Wide variety of functions

HMI GT05 Wide variety of functions
  1. Recipe function
    Recipes are sets of data containing all variables necessary for executing a certain function. You can use GTWIN's recipe function to enter, change or read values for the variables stored in the recipe.
  2. Line and bar graphs
    These functions allow you to define reference devices (i.e. addresses) in order to generate graphs, allowing you to easily monitor or compare operation status at a glance, for example.
  3. The flow display function allows you to display a text or message streaming right to left on the screen like an electronic bulletin board. 128 flowing messages of up to 64 characters can be displayed.

Key features

  • 3.5-inch STN monochrome or 4096-color display
  • Resolution: 320x240 dots
  • USB interface
  • SD memory card slot (16GB max.)
  • Dimensions: 110 x 92.2 x 33.8mm
  • Graph, recipe and flow display function
  • Through-function for simultaneous debugging of the GT and PLC
  • Numerous 3D objects for a realistic appearance
  • Isolated power supply for enhanced reliability


Main units GT05G GT05M GT05S
Rated voltage 24V DC
Power consumption      
Screen size (WxH) 3.5'' (71 x 53,3mm)
Display device STN monochrome LCD STN color LCD
Display color 2 colors (black/white) 4096 colors
Resolution (WxH) 320 x 240 dots
Backlight 3-color LED (green/orange/red) 3-color LED (white/red/pink) White LED
Numbers of characters 768
Memory capacity (F-ROM) 2.048kB 12.288kB
External interface
Serial port RS232C / RS422 (RS485)
USB port X
Ethernet --
SD memory card X
Sound output jack --