The PAN1780 is a Bluetooth® 5 Low Energy Module based on the Nordic nRF52840 single-chip controller. The Bluetooth® 5 feature enables a higher symbol rate of 2 Mbps using the high-speed LE 2M PHY. Furthermore, the new LE advertising extensions allow for much larger amounts of data to be broadcasted in connectionless scenarios. In addition to Bluetooth® 5,the qualified Bluetooth® mesh profile stack supports 802.15.4 and NFC-A. Also available is the PAN1780-AT, a variant with additional AT Command Set.
With its ARM® Cortex®-M4F a 1MB Flash and a 256kb RAM, the PAN1780 offers high design flexibility. It can easily be used in standalone mode, thereby eliminating the need for an external processor - saving complexity, space and cost.
|Production status||Mass production|
|RF category||Bluetooth® 5 Low Energy, IEEE® 802.15.4, NFC|
|Software/profile||SDK by Nordic Semiconductor|
|Rx sensitivity||-95 dBm @1Mb/s,-103 dBm @125kb/s|
|Tx power max||+8 dBm|
|Antenna option||Ceramic Antenna|
|Size (l x w x h) [mm]||15.6 x 8.7 x 2.0|
|Power supply [V]||1.7 to 5.5|
|Power consumption Tx||4.8 mA @0dBm (3.3V)|
|Power consumption Rx||4.8 mA (3.3V)|
|Power consumption sleep||<1 µA|
|Interfaces||GPIO, UART, QSPI, I2C, I2S, PDM, ADC, PWM, NFC-A, USB2.0|
|Memory||1MB Flash and 256kB RAM|
|Speciality||Integrated 32kHZ Crystal|
|Evaluation kit||Single Evaluation Board (ENW89854AWKF); Two Evaluation Boards (ENW89854AXKF)|
|Certification||EU CE RED / FCC / IC|
|Operating temperature||-40 to +85 °C|
|Standard packaging QTY||1500 pcs|
The evaluation board for PAN1780 features
- PAN1780 module
- Segger J-Link on-board Debugger
- FTDI UART-USB converter
- 4 User Buttons
- 4 User LEDs
- Native USB interface
- NFC interface
- Access to several GPIOs
- Arduino form factor (ENW89854AUKF)
|P/N||Package includes||Stock Search|
|ENW89854AWKF (NRND)||1x PAN1780 Evaluation Board||BUY|
|ENW89854AXKF (NRND)||2x PAN1780 Evaluation Board||BUY|
|ENW89854AUKF||1x PAN1780 Evaluation Board Arduino form factor||BUY|
For hardware design requirements please have a look at the Module Integration Guide. It is intended to support the easy integration of the module into a product and to ensure the compliance with regulatory requirements.
Cooperation with Finnish mesh connectivity provider Wirepas
Find out more about the Wirepas Massive stack for reliable and scalable meshed solutions and how our PAN1780s can be used as Wirepas Nodes.
- based on 2.4 GHz
- over 100.000 devices per network
- AES-128 encryption
- interference optimization
PAN1780 featured in FTM Issue #2 2020
The PAN1780, our High Performance Bluetooth Low Energy 5.0 module, was featured in the latest Future Technology Magazine (FTM).
"The PAN1780 from Panasonic is an integrated Bluetooth® Low Energy (BLE) wireless module which includes an MCU core and generous memory provision for running the host application as well as multiple radio protocols"
|Report of Confirmation of EU RoHS (Wireless Modules)||Environmental, RoHS||733KB||18.08.2021||English|
|Report of Confirmation of EU REACh (Wireless Modules)||Environmental, REACh||733KB||18.08.2021||English|
In case of any additional questions and for test reports, please contact us.