About us
NPM-WX
Features
The NPM-WX (Next Production Modular - Wide X) is ready for your industry 4.0 shop floor. With optional auto recovery and remote operation, the NPM-WX fulfils the digital demand of future pick and place tasks. With 86000 cph and 136 feed reels, the NPM-WX offers great possibilities for a high-speed placement.
The NPM-WX can process large board sizes up to 750 x 610 mm and is able to place large connectors (up to 150 x 25 mm) and components (up to 120 x 90 mm) precisely. These are just some of the features that make the NPM-WX particularly advantageous for high mix manufacturing.
- 86000 cph with up to 136 feed reels
- Ready for line automatization
- Available APC system
- Automatic recovery options
- Remote operation option
- Lowest cost of ownership (TCO) with maintenance services
- Advanced feeder setup and component supply navigation
- Integrated floor management
Specifications
| Model ID | NPM-WX | NPM-WXS | |
|---|---|---|---|
| Model No. | NM-EJM9D | NM-EJM2E | |
|
PCB |
Single-lane mode |
Batch mounting : L 50 × W 50 ~ L 750 × W 610 2-position mounting : L 50 × W 50 ~ L 350 × W 610 |
|
| Dual-lane mode |
Dual transfer (Batch) : L 50 × W 50 ~ L 750 × W 300 Dual transfer (2-position) : L50 × W 50 ~ L 350 × W 300 |
||
|
Single transfer (Batch) : L 50 × W 50 ~ L 750 × W 590 Single transfer (2-position) : L50 × W 50 ~ L 350 × W 590 |
|||
| Electric source | 3-phase AC 200, 220, 380, 400, 420, 480 V 3.0 kVA | 3-phase AC 200, 220, 380, 400, 420, 480 V 2.1 kVA | |
| Pneumatic source *1 | Min.0.5 MPa、200 L /min (A.N.R.) | ||
| Dimensions (mm) | W 1 410 *2 × D 2 570 *3 × H 1 444 *4 | ||
| Mass |
2 740 kg (Only for main body : This differs depending on the option configuration.) |
2 660kg (Only for main body : This differs depending on the option configuration.) |
|
| Placement head | 1 head on each side (front, rear) | 1 head (rear camera is optional) | |
| Component supply |
Taping | Tape : 4 ~ 56 / 72 / 88 / 104 mm | |
| Front rear 17-slot feeder cart specifications : Max. 136 product types (4, 8mm tape) | |||
| Stick |
Front rear 17-slot feeder cart specifications : Max. 32 product types (single stick feeder) |
Front rear 17-slot feeder cart specifications : Max. 16 product types *5 (single stick feeder) |
|
| Tray | One side tray specifications : Max.24, Front-rear tray specifications : Max.48 | ||
| Placement head | Lightweight 16-nozzle head V2 (Per head) |
Lightweight 8-nozzle head (Per head) |
4-nozzle head (Per head) |
3-nozzle head V2 (Per head) |
|---|---|---|---|---|
| Max. speed | 43 000 cph (0.084 s / chip) | 23 000 cph (0.155 s / chip) |
8 400 cph (0.429 s / chip) 7 800 cph (0.462 s / QFP feeder) 7 100 cph (0.507 s / QFP tray) *8 |
9 400 cph (0.383 s / chip) 7 300 cph (0.493 s / QFP feeder) 6 350 cph (0.567 s / QFP tray) *9 |
| Placement accuracy (Cpk≧1) |
±25 μm/ chip |
±25 μm/ chip ±40 μm/QFP □12 mm Under ±25 μm/QFP □12 mm ~ □32 mm |
±20 μm/ QFP | ±20 μm/ QFP |
| Component dimensions (mm) |
0201 chip *6*7 / 03015 chip *6 0402 chip *6 ~ L 6 × W 6 × T 3 |
0402 chip *6 ~ L 45 × W 45 × T 12 or L 100 × W 40 × T 12 | 0603 chip ~ L 120 × W 90 × T 40 or L 150 × W 25 × T 40 | 0603 chip ~ L 120 × W 90 × T 40 or L 150 × W 25 × T 40 |
Notes
- Only for main body
- 2 010 mm in width if extension conveyors (300 mm) are placed on both sides.
- Dimension D including feeder cart
- Excluding the monitor, signal tower and ceiling fan cover.
- Stick feeders cannot be used on the rear feeder cart of NPM-WXS.
- 0201/03015/0402 component requires a specific nozzle/tape feeder.
- 0201 component placement is optional. (Under conditions specified by Panasonic)
- For any QFP □20 mm or less in size
- For any QFP □28 mm or less in size
* Placement tact time and accuracy values may differ slightly depending on conditions.
* Please refer to the specification booklet for details.
Downloads
| Name | Size | Date |
|---|---|---|
| NPM-WX, WXS | 2.3 MB | 07.08.2020 |
