RG131 - the radial lead component insertion machine
The RG 131 is the successor of the RHSG. By supporting 3/4 pitches, expanding the range of board sizes and increasing component insertion rate, this high-density radial component insertion machine increases productivity.
High speed insertion at a rate of between 0.25s and 0.6s per component can be achieved, even for large-size components with 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) configurations.
A comprehensive self-correction function ensures high reliability.
With large numbers of component supply and dual-partitioned component supply units, long-term operation can be obtained.
A total of up to 80 types of components can be mounted.
With large numbers of component supply and dual-partitioned component supply units, long-term operation can be achieved easily with the RG131. A total of up to 80 types of components can be mounted, with up to 32 (16 + 16) types of large components. The two separate component supply units enable components to be exchanged and replenished during operation.
|PCB dimensions (mm)||L 50 x W 50 to L 508 x W 381|
|Max. speed *1||0.25 s/component to 0.6 s/component|
|No.of component inputs||40||80 (Connection mode), 40 + 40 (Exchange mode)|
Pitch 2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm
Height Hn=Max. 26 mm Diameter D=Max. 18 mm
Resistor, Electrolytic capacitor, Ceramic capacitor, LED, Transistor, Filter, Resistor network
|PCB exchange time||about 2 s to about 4 s (Room temperature 20°C)|
|Insertion direction||4 directions (0 °, 90 °, -90 °, 180 °)|
|Electric source *2||3-phase AC 200 V, 3.5 kVA|
|Pneumatic source||0.5 MPa, 80 L/min (A.N.R.)|
|Dimensions (mm)||W 3 200 x D 2 417 x H 1 620 *3|
|Mass||2 250 kg||2 350 kg|
- On condition
- Compatible with 3-phase 220 / 380 / 400 / 420 / 480 V
- Excluding signal tower
* Values such as maximum speed may vary depending on operating conditions.
* Please refer to the “Specification” booklet for details.