DP-0 pressure sensor
Simple & easy operation
Two levels of setting modes allow for easy configuration of all essential sensor functions.
The setting mode "RUN mode" gives access to the following settings: threshold value setting, zero point adjustment, and key lock / release. The "detailed setting mode" gives access to the following settings used for basic configuration of the DP-0:
- Operation setting mode: Select either EASY mode, hysteresis mode, or window comparator mode
- NO / NC setting mode: Select either NO or NC as the comparative output operation.
- Response time setting mode: Select one of the response times available: 2.5ms, 25ms, or 250ms.
- Display color setting mode: Select red or white as the comparative output ON / OFF display color and the normal display color.
Black body for enhanced visibility of LCD display
The unit body is completely black to make the LCD display easier to see.
Firm and crisp clicking feel
The keys offer a firm and crisp clicking feel, thus making setting operations smooth and reliable.
Simple and highly visible display
The LCD offers a wide viewing angle so the display is easy to see even from an oblique angle. The alphanumeric display (12-segment display), key lock mark and OVER mark further enhance the readability of display.
Pressure unit display:
- Low pressure type: kPa,kgf/cm², bar, psi, mmHg
- High pressure type: MPa,kgf/cm², bar, psi
Red or white selectable as display color
The display color can be selected from red or white in accordance with the output operation. Since the detailed setting mode display is pink (unchangeable), the status of the pressure sensor status can easily be recognized by the color of the display.
Compact & lightweight design
Extra-short depth and light weight
The unit body measures only 24.9mm in depth, which makes it possible to install the sensor even in narrow spaces. The main unit weighs only about 25g, which means that mounting it on a moving part such as a robot arm increased the load only minimally.
Low Pressure Type and High Pressure Type Available
Two types to choose from according to applications
The low pressure type can be used with positive or negative pressure, while the high pressure type is suitable for positive pressure of up to 1 MPa.
- DP-001 (low pressure type) is ideal for applications such as suction. There will be no misoperation due to a vacuum breakdown.
- DP-002 (high pressure type) is ideal for applications where a reference pressure needs to be checked. It can also be used for simple suction applications
- Monitoring suction pressure on electronic components
- Checking reference pressure
|Type||Rated pressure range||Model no.||Pressure port||Comparative output|
|Low pressure type||-100.0 to +100.0kPa||DP-001||M5 female thread||NPN open-collector transistor|
|DP-001-P||PNP open-collector transistor|
|High pressure type||0.000 to +1.000MPa||DP-002||NPN open-collector transistor|
|DP-002-P||PNP open-collector transistor|
Type without connector-attached cable
To order the sensor without a connector-attached cable, add "-J" to the end of the model number listed in the table above. For example, a low pressure type sensor with PNP output and without connector and cable has the model number "DP-001-P-J".
CN-14A-C2 (Connector attached cable 2 m)
|Product name||Model no.||Description|
|Connector-attached cable||CN-14A-C1||Length: 1m||0.2mm² 4-core cab tyre cable with connector on one end Cable outer diameter: ø 3.7mm|
|Connector-attached robot cable||CN-14A-R-C1||Length: 1m||0.2mm² 4-core flexible cab tyre cable with connector on one end Cable outer diameter: ø 3.7mm|
|Connector||CN-14A||Housing with 4 contacts|
|Sensor mounting bracket||MS-DP1-1||For floor or ceiling mounting. Multiple sensors can also be mounted closely together.|
|MS-DP1-5||For wall mounting. Multiple sensors can also be mounted closely together.|
|Panel mounting bracket||MS-DP1-8||For mounting on panels with a thickness of 1 to 3mm. Multiple sensors can also be mounted closely together.|
|Front protection cover||MS-DP1-3||Protects the front side of the sensor (can be attached when the panel mounting bracket MS-DP1-8 is used)|
|Name||File Type||Size 1||Date||Language|
|2D CAD for DP-0||CAD||99.7 KB||30.07.2015||English|
|3D CAD for DP-0||CAD||616.7 KB||30.07.2015||English|
|CN-14A Instruction Manual, MJEC-CN14A||Manual||968.6 KB||01.06.2016||English|
|CN-14A-C Instruction Manual, MJEC-CN14AC||Manual||483.1 KB||01.06.2016||English|
|Catálogo Resumen Sensores||Data sheet||30.6 MB||28.04.2021||Spanish|
|Data sheet DP-0 (from Japan)||Data sheet||3.2 MB||English|
|Data sheet: Digital Pressure Sensor DP-0||Data sheet||3.2 MB||30.07.2015||English|
|Digital Display Pressure Sensor Instruction Manual, CMJE-DP0||Manual||467.1 KB||01.06.2015||English|
|Flyer DP-0 / EX-Z (from Japan)||Flyer||952.6 KB||English|
|Panel Mounting Bracket for DP-0 Series Instruction, MJECK-MSDP18||Manual||181.3 KB||01.06.2015||English|
|Raccolta Applicazioni Sensori||Data sheet||24.2 KB||20.12.2018||Italian|